信任运用PC板的客户 都应该对PC板板材有点了解，通常质量的通常厂家质保5年，好点质量的，厂家大多质保八年或十年，可是，近期有有些客户反映实习寿数达不到，毕竟要素安在？
Trust using PC board customers should know a little bit of PC board plate, usually quality usually manufacturers warranty five years, better quality, most manufacturers warranty for eight years or 10 years, however, recently, some customers reflect the good practice to reach, after all elements in?
对于PC板损坏的人为因素，非有必要需要思索以下几方面：
For PC board damaged man-made factors, it is necessary to ponder the following several aspects:
1.加工差错。很多客户把PC板板材买回去往后都会把板材加工，可是在板材加工的进程中采用了差错的办法或不妥的加工东西，都会构成PC板的损害。
1. The machining error. Many customers buy a PC board plate back in the future will put the plate processing, but in the process of plate production USES the methods of error or improper processing, will constitute a PC board damage.
2.设备差错。PC板工程设备时，很多施工人员在设备还没完毕之前就损坏或撕掉了PC板里边的保护膜，致使PC板材的表面损坏擦伤，须名PC板不并不耐磨，必需比及设备完毕前方可揭掉保护膜。
2. The device error. PC board engineering equipment, a lot of construction personnel in equipment damaged or torn off before haven't finished the PC board inside the protective film, the raw surface damage on the PC board, PC board must be known not wear-resisting, ratio and necessary equipment to complete the front may remove the protective film.


3.环境作用。很多客户买了PC板回去往后就直接堆积，并没有思索到附近的环境。板材在寄存的时分肯定要先知道附近的环境，切勿在分外湿润的环境内贮存。而且PC板不耐酸碱，切勿与碱性或腐蚀性物质贮存在一起，因为PC板会与这些化学物质发生化学反应致使板材表面腐蚀。
3. The environmental effect. Many customers bought a PC board back he piled up directly in the future, not to think to the nearby environment. Sheet in time register must first know nearby environment, do not store in particularly humid environment. PC board is not resistant to acid and alkali, and not with alkaline or corrosive substances stored in together, because of the PC board will react with the chemicals as plate surface corrosion.
归根到底，很多PC板所谓的运用寿数添加，更多是人为损害不妥构成的，因PC资料的特殊性，贮存及运送PC板时需要分外留心一些细节，
In the final analysis, a lot of PC board the use of so-called stature to add, artificial damage is more wrong, because of the particularity of PC material, storage and delivery of PC board need to be especially pay attention to some details,